Please note – these files have been checked for all known viruses. This file requires that you have WinZip (or something to open a ZIP file) already installed on your computer. If you are using Windows NT, 2000, XP or Vista you must be logged on as an administrator for this to work.

If you are using Revit™, make sure you check out Revit instructions below.

Instructions for AccuRender 3.1

Please note – these files have been checked for all known viruses.

If you are in any doubt, right click on the files and open them with winzip. (This method is safer) If this is a new installation, you will need to create a new folder on your C: drive. Name the folder Accustudio. If you already have the Accustudio.MLIB installed, use the same folder that Accustudio resides in.

If you use the default location of c:/accustudio, you can use the instructions below as is. However, if you change it, change all of the following references of "c:/accustudio…" to your prefered location.

Install the MLIB file

Add the Accustudio paths for new installations only.
If you already have the Accustudio.MLIB installed and working, you DO NOT need to go any further with these instructions.

The ACCUSTUDIO library should now be available from within Accurender.

Special Instructions for Revit Users:

The ACCUSTUDIO library should be available in the "Material Libraries" dialogue.